Cytiva's Whatman™ 6725-5002 Solvent IFD™ In-Line Filter/Degasser for HPLC with 0.2µm Polypropylene Membrane, O-Ring Type, 50mm (Pack of 10)

Item Number:FM200-2
Manufacturer Part No:6725-5002
Manufacturer:Cytiva (Whatman)
Units:Pack of 10

Details

  • Size: 50mm; 0.2µm; polypropylene membrane
  • Provides pure filtration of aqueous based HPLC mobile phases
  • Polypropylene housing; o-rings included
  • Fittings to accommodate 1/16inch-1/8 inch tubing and an air vent on the inlet with luer lock cap
  • Applications include: HPLC analysis, pharmaceutical research, and analytical chemistry
  • Pack of 10
This Whatman™ brand Solvent IFD™ in-line filter/degasser connects directly into an HPLC line to simultaneously filter and degas the mobile phase as it is being used. The Solvent IFD™ provides pure filtration of organically based HPLC mobile phases. It has a 0.2µm high-flow polypropylene membrane for mobile phases containing organic solvents. It has polypropylene housing the circumference of which is sealed by a security ring fittings to accommodate 1/16inch-1/8 inch tubing and an air vent on the inlet with luer lock cap to enable priming. This in-line filter works on the principle of inchbubble pointinch - the point of pressure at which gases will pass through a wet membrane. If pressure is maintained below the bubble point the gas will not pass through the membrane and is trapped by the particular filter device. Applications include: HPLC analysis pharmaceutical research and analytical chemistry. (O-Rings included.) 10/Pack. Whatman™ # 6725-5002.

Documents & Videos

This Whatman™ brand Solvent IFD™ in-line filter/degasser connects directly into an HPLC line to simultaneously filter and degas the mobile phase as it is being used. The Solvent IFD™ provides pure filtration of organically based HPLC mobile phases. It has a 0.2µm high-flow polypropylene membrane for mobile phases containing organic solvents. It has polypropylene housing the circumference of which is sealed by a security ring fittings to accommodate 1/16inch-1/8 inch tubing and an air vent on the inlet with luer lock cap to enable priming. This in-line filter works on the principle of inchbubble pointinch - the point of pressure at which gases will pass through a wet membrane. If pressure is maintained below the bubble point the gas will not pass through the membrane and is trapped by the particular filter device. Applications include: HPLC analysis pharmaceutical research and analytical chemistry. (O-Rings included.) 10/Pack. Whatman™ # 6725-5002.