Oakton® WD-08491-06 Digi-Sense Immersion Thermistor Probe, Dual Range: -40 to 150°C/-40 to 302°F, Diameter: 0.15625-Inch, Cable Length: 3-Meter

  • 4.5 inch probe tip with 316SS sheath, 10-ft nondetachable lead with 1/4 inch phono plug
  • Liquid-immersion probe, 5/32 inch diameter; immersible only to cap unless waterproof
  • Use with any meter that accepts Oakton Digi-Sense or YSI 400 Series probes
  • Offers excellent accuracy over the biological temperature range
  • Manufacturer Part No: EW-08491-06
(0) No Reviews yet

PLEASE NOTE: Product images and descriptions may not exactly represent the product. Prior to making your purchase, please confirm that the manufacturer part number shown above matches the product you seek. Returns are not allowed for such differences if the correct manufacturer part number is shipped.

Item Number: OAK-WD-08491-06
$168.83

Sold in: Eaches

UnitMSRPYour PriceStock StatusQty
Each178.75168.83Lead Time

New

Details

The Oakton thermistor probes offer excellent accuracy over the biological temperature range. Thermistor thermometry is based on the principle that metal oxides change resistance with a change in temperature. Our thermistors decrease in resistance as the temperature increases. The resistance change is detected by the meter where it is converted and displayed as a temperature reading. Probes are accurate to +/- 0.2°F from 32 to 150°F (+/- 0.1degC from 0 to 70degC). Electrically isolated probes come with a nondetachable 10-ft lead with phone plug (except as noted). Water-resistant junctions between probe and lead should not be immersed; detachable leads are not water resistant. 4.5' probe tip with 316SS sheath - 10-ft nondetachable lead with 1/4' phono plug. Oakton #: WD-08491-06

Documents & Videos

The Oakton thermistor probes offer excellent accuracy over the biological temperature range. Thermistor thermometry is based on the principle that metal oxides change resistance with a change in temperature. Our thermistors decrease in resistance as the temperature increases. The resistance change is detected by the meter where it is converted and displayed as a temperature reading. Probes are accurate to +/- 0.2°F from 32 to 150°F (+/- 0.1degC from 0 to 70degC). Electrically isolated probes come with a nondetachable 10-ft lead with phone plug (except as noted). Water-resistant junctions between probe and lead should not be immersed; detachable leads are not water resistant. 4.5' probe tip with 316SS sheath - 10-ft nondetachable lead with 1/4' phono plug. Oakton #: WD-08491-06

Ratings & Reviews

No reviews available

Be the first to Write a Review